11 Piece Tool Set with Metal carrying case
All tools are STYLE XZN
You will get five LONG
and
five VERY SHORT tools

Long and short are Sizes M5, M6, M8, M10 and M12

(THE M5 IS VERY HARD TO FIND
AND THE SIZES 8 , 10 and 12 are very popular sizes with the European auto techs.

XZN = means 12 POINT
Metric Bits
TRIPLE SQUARE

Pictures are for reference.
Each LONG bit is 3 inches Long.
Each SHORT bit is 1.2 inches long
The short bits are hard to find in these sizes and are very handy in a tight spot.


Heat treated alloy steel.
Sturdy 3/8 inch hex drive shaft.
The adapter is a hefty 1/2 drive
(1/2 x 3/8 converts to 3/8 to hold each tool which has a 3/8 shaft on each).

Tools Applicable to BMW VW Audi Porsche Mercedes Etc...

You will be hard pressed to find a set with these sizes and lengths in a metal case for this price!

Valve Stem Seal Remover/Installer Kit
Works on both valves still seated or removed. Precision machined seal driving adapters guide the seal for proper setting. Set contains: Valve stem seal plier. Drive handle 6' (150mm) long.
2 Deep seal driving sockets for seals O.D. 10.8 14.8mm
7 Seal driving adapters fit seals 5mm, 5.5mm, 6mm, 6.6mm, 7mm, 8mm, & 3/8'. Comes in the blow molded plastic carrying case.

FACTORY TOOL Tensioner Number T40009 Original Factory Tool Made in Germany. FOR TENSIONING OF TOOTH BELT WITH PROPER TIGHTENING TORQUE VW AUDI T40009 ideal for the timing belt tensioner on 924 as well. You can use this Tool with a torque wrench and get a more precise tensioning figure. Especially important when dealing with the belts on 924 Turbo 924 (76 85) with the 2.0L ) which is a big time interference engine and if the belt goes so do most of your valves.

Set of 2 Valve Lappers Sturdy rubber suction cups Hardwood Handle.To be used with lapping compound (not included) for hand lapping ValvesSizes are 5/8 x 13/16 diameter cups for smaller valves, 1 1/8 x 1 3/8 inch for large.

Super Set including 5 Point and 6 Point Tools. You get full coverage with this Extra Long Security Torx Driver Set
Features 12" long blades with TamperProof Torx on one end and 5 Point security tips on the opposite end.
Double drive screwdriver handle, bits can be inserted as a standard screwdriver, or as a T handle.
S2 steel, the strongest hardest drivers available! Heat treated to 60 62 RC
The blades are satin chrome plated with a black tip on the 5 point end.
New extra long security driver set, includes 12" long interchangeable blades with T10 thru T40 Tamper Proof Torx on one end and 5 Point security Drivers on the opposite end. The Blades can be put in the 2 Way screwdriver handle as a screwdriver or use the "T" handle. The set also includes a special bit holder so these blades can be used with your favorite 1/4 drive ratchet handle. Comes with a plastic storage case.

This is the best price set on the market...Bar None! The
competition does NOT offer this COVERAGE for the price they charge.
This is a Master Set and it is used with BMW, Mercedes, Volkswagen Audi, Porsche
and DIN.
FULL COVERAGE on Volkswagen Audi.
What makes this set better is a total of 8 keys for VW Audi and two for BMW plus
the grips on the keys are coated for easy use.
You will notice a total of 3 different sets for Volkswagen Audi, two
different tools for BMW and a set for newer Mercedes that will also work with
older Mercedes and also works with some Porsche. (Same as Porsche ref:
000 721 957 01)
Here is what you get....Details below...

A. VW Tools (4) Number T10057 Audi A4, A6, A8 and New Beetle
For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and
for CD changers in Glove box.
If you have 4 slots VW AUDI this is the set (T10057) you need. This 4 piece set
is extremely popular.
The 2 piece VW set is Number VW 3316 New Body Style Passat Jetta Golf . Virtually
full coverage for Volkswagen Audi when you buy this set.

B. BMW Tools are one Pentagon shaped tool with a 3 5/8 inches
overall length. Applicable: Most BMWs. This Five sided driver is used to release
anti theft radio mounts. You will also get the special rare very small allen
tool for BMW (upper left) For newer BMW E38 & E39 7 SERIES

C. Mercedes Tools covers almost all newer and older vehicles,
especially 1992 and newer 129, 140, 163, 202 & 210, Range Rover with Becker
Nav System.
The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne
911, 996 , 987, Carrera etc.
Same as Porsche ref: 000 721 957 01
D. "U" Hooks
for DIN Ford

25 BLADE EXTRA LONG FEELER GAUGE
For long reach applications especially diesel. 12" blades .0015., .002, .003, .004,
.005, .006, .007, .008, .009, .010, .011, .012, .013, .014, .015, .016, .017, .018, .019, .020,
.021, .025, .027, .030, .040". Blades also marked with metric equivalent. Knurled nut
allows blade removal.Be
sure to CLICK HERE for More Ignition Tools

Valve Grinding & Lapping Compound Fine/CoarseTwo duplex containers include 4 oz (108 grams) each Coarse Compound for Roudhing and Fine Compund for Finishing. Ideal for seating valves, mating gears, lapping injectors and honing knives. Mix compound with oil to obtain desired consistency.

JET REAMER SET
16 piece Jet Reamer Set with a 0.33mm 2.0mm range. Applicable to Porsche, VW and Audi models with carburetors.
MADE IN GERMANY Be
sure to CLICK HERE for More Special Tools

Indicator Points Set Complete Set comes as shown Includes 22 assorted round, pointed, flat, and angled points. 4 48 Threads.