Model MN-1 Mini-Node Communication Signal Converter transforms half duplex RS-485 serial communications signals into those that can be read by any computer with USB port. While integral USB connector and RJ-45 connector minimize set up time by eliminating extra wiring, USB-powered design also eliminates need for external power source. Solution consumes 0.4 W of power and supports baud rates from 75-115,200 bps.
This story is related to the following:

Suited for use in dirty or dusty environments with water washdown cleansing, VFS 60 Motor Feedback Systems come with single point of potential access. Hollow shaft encoders feature nickel code disc that facilitates operation in harsh industrial environments and tolerance to temperatures as high as 100ºC. They are IP65 rated and deliver from 1-10,000 ppr in industry-standard 60 mm housing. Ball bearings that support encoder shaft are spaced 30 mm apart to ensure concentricity.
This story is related to the following:

Featuring 16-bit data bus, I/O, and other hardware interfaces that expand via DIMM 200-pin, ARM Mini2410-I processor card incorporates all common features of S3C2410, and measures 67.6 x 45 mm. It has 0 to +70°C temperature, 64 Mb SDRAM, 2 Mb Nor flash, On-chip MPLL, 32,768 Hz RTC, 1.0 mm space 8-pin JTAG interface, and single 3.3 V power supply. Unit includes Nand Flash on carrierboard or Nor Flash on Processor boot, and selectable CPU jumpers.
This story is related to the following:

Suited for water, chemicals, brine, corrosives, and low-viscosity pure liquids, P420 Series vortex-shedding flow meters meet requirements of water desalination, chemical, and water treatment operations. Non-mechanical meters have no O-ring seals, and are designed to transmit low-viscosity liquids that are compatible with PVC, including liquids that contain particles. Units are available in ½, ¾, 1, 1½, and 2 in. pipe sizes with 12, 25, 50, 100, and 200 gpm flow rates, respectively.

This story is related to the following:

Featuring built-in data logger with on-screen flow reports, OCF 4.0 uses non-contacting ultrasonic sensor to measure wastewater flow through flumes or weirs. Windows software is included to retrieve, display, and graph flow reports in customizable formats. Along with 3 control relays, flow rate display, and 10-digit totalizer, additional features include isolated 4-20 mA, 0-5 V, USB, and RS232 outputs; automatic temperature compensation; and ±0.25% accuracy.
This story is related to the following:

Camera-based solution, Sol(TM) Server 1.2, automatically corrects geometric distortion, intensity, and color variation that result from using multiple overlapping projectors. It works with flat, n-gons, cylindrical, or spherical displays and features robotic pan-tilt option that, when attached, provides support for multiple camera vantage points. Along with soft-edge and localized blending capabilities, features include precision scene alignment and elimination of projector overspray.
This story is related to the following:

In addition to precision (2% RH) humidity meter, HD500 combines built-in IR thermometer for non-contact temperature measurement to 932°F, with 30:1 distance to target ratio, and built-in Type K thermometer that provides contact temperature measurements to 2,501°F. Double molded housing has backlit triple LCD to aid operation in low-visibility applications, while self-calibration utility allows for field calibrations using optional RH calibration bottles.
This story is related to the following:

Featuring automatic PN measurement setting for RF attenuation and IF gain, Agilent E5052B Signal Source Analyzer is used for traditional phase-noise measurements such as VCO evaluation, PLL testing, jitter measurements, and signal source analysis. Firmware v3.1 includes Equation Editor that extends Trace Math capabilities, providing way for users to create applications with post-processing of measured data or traces. Context-sensitive online help menu is also incorporated.
This story is related to the following:

With 9-23 Vdc, 500 mA power supply, Model GAO 9200C features 32-bit, 60 MHz BUS, 16/32/64 Mb SDRAM, 2/4/8 Mb Flash, 10/100 M Ethernet, 1 USB Host 2.0, and 1 USB Device 2.0. It consists of 1 compact flash interface, 1 smart media interface, 1 IR interface, 2 RS232, JTAG interface, and one 64-pin extended slot. Accessories include 1 standard serial cable, dc power supply, CDROM including schematic diagram and user manual, and U-Boot and Linux source code.
This story is related to the following:

Model STDV730F(TM) features STR730F-Z2T6 ARM7TDMI Flash microcontroller with 256 Kb of flash, 16 Kb of RAM, and peripheral functions, including up to 16-channel 10-bit ADC, 20 timers, 4 x UARTs, 3 x CANs, SPI, I2C, DMA, RTC, PWM, and 112 GPIO. Evaluation board is intended for embedded applications requiring compact MCU, as well as factory automation systems, and appliances, and features single 5 V power supply suited for industrial applications.
This story is related to the following: